Showing posts with label Casey. Show all posts
Showing posts with label Casey. Show all posts

Wednesday, March 31, 2010

the work

Here are some images of each piece in the show, with some details. Consider it a little taste of what you will see if you come to the opening!


Jim Hake, Fbriend Project









Robin Strangfeld, 001.03.10







Frederick Bartolovic, You Are Here













Blake Jamison Williams, Resilience





Casey McDonough, synaptic plasticity





Thursday, February 11, 2010

Casey McDonough

What's inside:





In the larger of the two blobs (eggs? orbs?) is a small commercial amplifier that I stripped down and retrofitted. You can see it runs off of a 9-volt battery. The stock volume control sucks, so I installed a more sensitive volume control in the other half of the pair. In the smaller blob is a simple homemade oscillator, which also runs on 9 volts. I can control the frequency, or pitch, of the tone quite carefully. In this version I've used a photo-sensitive resistor in the circuit, which you can see as a tiny little eye on the smaller blob. A photoresistor is exactly what it sounds like: a light-sensitive resistor. Changing the resistance in the oscillator circuit causes a change in the frequency, so here the resistor acts as a sort of motion detector; as a person gets closer to the small blob and cuts off some of the light (even a tiny amount), the frequency of the tone will change and a new sound will come out of the big blob. I like to think of it as involuntary user interaction with an initial element of surprise. I will have 5 or 6 of these guys playing their own tones very quietly, though I haven't decided if they will all play the same tone or something else.
As soon as I figure it out I will post a quick snippet of the sounds themselves. Until then consider it a surprise.

Friday, February 5, 2010

Casey McDonough

At NCECA 2009 in Phoenix I worked on an installation in the so-called "project space" during the conference itself. I was permitted to use the space to experiment, which is exactly what I did, working to incorporate ceramic and unfired clay with several mixed media elements including electronics that generated sound. For "Multiples of Five" I am working to refine some of the perceived shortcomings from that experience.
So far I have completed several pairs of ceramic elements with electronics smoothly incorporated into the objects themselves, thereby addressing the disconnect that I've recognized between ceramic and electronics in the past. I've also been constructing some modular elements using unfired clay and steel, which should make installation substantially easier.
One of my major shortcomings previously involved a lack of material knowledge, in particular the material I chose to use in order to delineate sculptural elements from the floor and/or wall. My friend, the artist Joe Page, introduced me to adhesive vinyl for signmaking, which comes in a great variety of colors and provides me with the flat and consistent ground that I had been looking for. I've found that this vinyl is helping me to resolve several aesthetic issues, though it is relatively difficult to work with.
It won't seem apparent in any of the included images, but I plan for this piece to connect the vertical plane of the wall with the horizontal plane of the floor. Expect to see details of the electronics as I get further along in the development of that element.

See more of my work at:
http://www.caseymcdonough.com/